Install TWRP Recovery on Samsung Galaxy M62

Installing TWRP Recovery on your Samsung Galaxy M62 is a crucial step for customizing and optimizing your device’s performance. This step-by-step guide will walk you through the process of preparing your device, downloading necessary files, and installing TWRP Recovery.

Key Takeaways

  • Check the compatibility of TWRP Recovery with your device model before proceeding.
  • Enabling Developer Options is necessary for advanced customization and development tasks.
  • Unlocking the bootloader is a prerequisite for installing TWRP Recovery on your Samsung Galaxy M62.
  • Download the correct TWRP Recovery file specific to your device model.
  • Use Odin Tool to facilitate the flashing process of TWRP Recovery on your Samsung Galaxy M62.

Preparing Your Device

Check Device Model

Before proceeding with the installation of TWRP Recovery, it’s crucial to ensure that you have the correct model of the Samsung Galaxy M62. Installing software intended for a different model can brick your device.

To verify your device model:

  1. Go to ‘Settings’ on your phone.
  2. Scroll down and select ‘About phone’.
  3. Look for the ‘Model number’ field.

Make sure the model number matches one of the supported models for TWRP. This information is typically found on the TWRP official website or the forum where you’re downloading the recovery image.

If your device model does not match, do not proceed with the installation as it may lead to irreversible damage to your phone.

Enable Developer Options

To enable Developer Options on your Samsung Galaxy M62, you’ll need to access the ‘About phone’ section in your device’s settings. Tap on the ‘Build number’ seven times to unlock the Developer Options menu. This hidden menu is essential for the next steps, as it allows you to enable USB debugging and OEM unlocking.

Once you have successfully unlocked Developer Options, navigate back to the main settings menu. Here, you’ll find the ‘Developer Options’ now listed. Open it and look for the ‘USB debugging’ and ‘OEM unlocking’ options. Ensure both are turned on before proceeding.

Remember, enabling OEM unlocking is crucial as it will allow you to unlock the bootloader, which is a necessary step before you can install TWRP Recovery on your device.

Unlock Bootloader

Before proceeding with the installation of TWRP Recovery, it is crucial to unlock the bootloader of your Samsung Galaxy M62. This step is necessary as it allows you to install custom software on your device. However, be aware that unlocking the bootloader may void your warranty and erase all data on your device. Therefore, it is recommended to back up your data before proceeding.

Unlocking the bootloader is an essential step in the process of installing custom recovery. It is the gateway that allows you to flash TWRP Recovery onto your device.

Follow these general steps to unlock the bootloader:

  1. Go to the Developer Options menu that you enabled earlier.
  2. Look for the ‘OEM Unlocking’ option and enable it.
  3. Turn off your device.
  4. Boot into the bootloader mode by pressing the specific key combination for your device (usually Power + Volume Down).
  5. Follow the on-screen instructions to unlock the bootloader.

Remember, the exact steps may vary depending on your device’s firmware version. After successfully unlocking the bootloader, you can proceed to the next phase, which involves downloading the necessary files for TWRP installation.

Downloading Necessary Files

Download TWRP Recovery

To proceed with the installation of TWRP Recovery on your Samsung Galaxy M62, you must first download the correct TWRP image file for your device. Ensure that you download the version specifically tailored for your model to avoid any compatibility issues.

Visit the official TWRP website or a trusted repository to find the appropriate file. Below is a list of steps to guide you through the download process:

  • Navigate to the TWRP official website or a trusted hosting site.
  • Locate the search bar or device selection menu.
  • Enter your device model, which is ‘Samsung Galaxy M62’.
  • Select the latest version of TWRP available for your device.
  • Click on the download link to obtain the .img file.

Remember to verify the checksum of the downloaded file to ensure its integrity and authenticity. This step is crucial for maintaining the security of your device.

Download Odin Tool

With the TWRP Recovery file ready, the next step is to download the Odin Tool. Odin is essential for flashing TWRP on your Samsung Galaxy M62 as it is the software used to communicate with your device in download mode.

To ensure a smooth installation process, download the latest version of Odin from a reputable source. Below is a list of steps to follow:

  • Visit the official Odin download website or a trusted community forum.
  • Look for the latest version of Odin available.
  • Click on the download link and save the file to your computer.
  • Extract the zip file to a folder you can easily access.

Make sure to download Odin only from official or well-known sources to avoid the risk of malware or other security issues.

Installing TWRP Recovery

Boot into Download Mode

To install TWRP Recovery on your Samsung Galaxy M62, you must first boot your device into Download Mode. This special boot mode allows your device to interface with Odin, the software used to flash TWRP. Follow these steps to enter Download Mode:

  1. Power off your Samsung Galaxy M62 completely.
  2. Press and hold the Volume Down + Volume Up buttons simultaneously.
  3. While holding these buttons, connect your phone to a computer using a USB cable.
  4. Continue to hold the buttons until you see a warning screen.
  5. Press the Volume Up button to confirm and enter Download Mode.

Once in Download Mode, your device is ready to communicate with Odin. Make sure not to disconnect the USB cable or power off your device during this process, as it could lead to complications or even bricking your phone.

Flash TWRP Recovery

Once you have Odin and TWRP Recovery files ready, it’s time to flash TWRP onto your Samsung Galaxy M62. Ensure that your device is in Download Mode and connected to your PC before proceeding.

  • Open the Odin tool on your computer.
  • In Odin, click on the ‘AP’ button and select the TWRP Recovery file you downloaded.
  • Make sure that ‘Auto Reboot’ and ‘F. Reset Time’ options are checked.
  • Click ‘Start’ to begin the flashing process.

The flashing process will take a few minutes. Do not disconnect your device or close Odin until you see a ‘PASS’ message on Odin.

After the flash is successful, your device will automatically reboot. However, to prevent it from booting into the standard OS, you’ll need to manually redirect it to Recovery Mode.

Reboot into Recovery Mode

Once you have successfully flashed TWRP Recovery onto your Samsung Galaxy M62, the final step is to reboot your device into Recovery Mode. This is crucial to ensure that TWRP is properly installed and functional. Immediately after the flashing process is complete, do not allow your device to boot into the standard operating system. Instead, follow these steps:

  1. Press and hold the Volume Up + Power buttons simultaneously.
  2. Release the buttons when the Samsung logo appears.
  3. Your device should now boot into TWRP Recovery mode.

If you encounter any issues during this process, such as the device booting into the standard OS or TWRP not appearing, you may need to repeat the flashing process or check for errors in the previous steps.

It’s important to note that booting into Recovery Mode right after installation is a critical step in the TWRP installation process. This action will replace the stock recovery with TWRP and allow you to start using the custom recovery features.


In conclusion, installing TWRP Recovery on your Samsung Galaxy M62 can greatly enhance your device’s capabilities and customization options. With TWRP Recovery, you can easily flash custom ROMs, create backups, and perform advanced system modifications. Follow the step-by-step guide provided in this article to successfully install TWRP Recovery on your Samsung Galaxy M62 and unlock a world of possibilities for your device.

Frequently Asked Questions

What is TWRP Recovery?

TWRP (Team Win Recovery Project) is a custom recovery for Android devices that allows users to install custom ROMs, create backups, and perform various system-related tasks.

Is it safe to install TWRP Recovery on my Samsung Galaxy M62?

When done correctly, installing TWRP Recovery is generally safe. However, it may void your warranty and there are risks involved if not followed properly.

Do I need to root my Samsung Galaxy M62 to install TWRP Recovery?

Rooting your device is not necessary to install TWRP Recovery, but having a rooted device may provide additional functionality within TWRP.

Can I revert back to the stock recovery after installing TWRP Recovery?

Yes, you can revert back to the stock recovery by flashing the stock recovery image using Odin or a similar tool.

Will installing TWRP Recovery erase all data on my Samsung Galaxy M62?

Installing TWRP Recovery itself should not erase any data, but it is always recommended to backup your data before performing any system modifications.

How can I check if TWRP Recovery is properly installed on my Samsung Galaxy M62?

You can boot into recovery mode and see if the TWRP interface appears. Additionally, you can check the recovery version displayed to confirm installation.

Leave a comment