Install TWRP Recovery on Samsung Galaxy S7 Edge

If you own a Samsung Galaxy S7 Edge and want to enhance its capabilities by installing TWRP Recovery, this step-by-step guide will help you through the process. By following these instructions carefully, you can unlock the full potential of your device and enjoy advanced customization options.

Key Takeaways

  • Make sure to check your device model before proceeding.
  • Enabling Developer Options is essential for advanced device settings.
  • Unlocking the bootloader is necessary for installing custom recoveries like TWRP.
  • Always backup your data before making any system modifications.
  • Verify the successful installation of TWRP Recovery to ensure proper functionality.

Preparing Your Device

Check Device Model

Before proceeding with the installation of TWRP Recovery, it’s crucial to ensure that you have the correct model of the Samsung Galaxy S7 Edge. Installing software intended for a different model can brick your device.

To check your device model, go to:

  1. Settings
  2. About phone
  3. Model number

Make a note of the model number and verify that it matches one of the supported models for TWRP:

  • SM-G935F
  • SM-G935FD
  • SM-G935X
  • SM-G935W8

It’s important to double-check this information as flashing the wrong TWRP image can lead to an inoperable device.

Enable Developer Options

To enable Developer Options on your Samsung Galaxy S7 Edge, you’ll need to access the ‘About phone’ section in your device’s settings. Here, locate the ‘Build number’ and tap it seven times. A message will appear indicating that you are now a developer. This step is crucial as it allows you to perform advanced actions required for the installation of TWRP Recovery.

Follow these steps to enable Developer Options:

  1. Open the ‘Settings’ app on your device.
  2. Scroll down and select ‘About phone’.
  3. Find the ‘Build number’ and tap it seven times.
  4. Enter your lock screen PIN or password if prompted.
  5. A message will confirm that Developer Options have been enabled.

With Developer Options enabled, you can now proceed to unlock the bootloader, which is a necessary step before installing TWRP Recovery. Remember, unlocking the bootloader may void your warranty and erase all data on the device, so proceed with caution and ensure you have backed up all important data.

Unlock Bootloader

Before proceeding with the installation of TWRP Recovery, it is crucial to unlock the bootloader of your Samsung Galaxy S7 Edge. This step is necessary to allow the flashing of custom recovery, which otherwise would be blocked by the device’s default security protocols.

To unlock the bootloader, follow these general steps:

  1. Go to the official Samsung Developer website.
  2. Register for a developer account if you haven’t already.
  3. Locate the ‘Unlock Bootloader’ section and follow the specific instructions for your device model.

Remember, unlocking the bootloader may void your warranty and will erase all data on the device. It is recommended to back up your data before proceeding.

Once the bootloader is unlocked, your device is ready for the custom recovery installation process. Ensure that you proceed with caution and follow the subsequent steps carefully to avoid any potential issues.

Downloading Necessary Files

Download TWRP Recovery

To proceed with the installation of TWRP Recovery on your Samsung Galaxy S7 Edge, you must first download the correct TWRP image file for your device. Ensure you download the version specifically tailored for your model to avoid any compatibility issues.

Visit the official TWRP website and navigate to the ‘Devices’ section to find your model. Here’s a simple list to follow:

  • Go to the TWRP official website.
  • Click on the ‘Devices’ tab.
  • Search for ‘Samsung Galaxy S7 Edge’.
  • Select the correct model from the list.
  • Download the latest TWRP image file.

Remember to verify the checksum of the downloaded file to ensure its integrity and authenticity. This step is crucial for maintaining the security of your device during the flashing process.

Download Odin Tool

With the TWRP Recovery file ready, the next step is to download the Odin tool. Odin is a utility software developed by Samsung for flashing firmware to Samsung devices. Ensure you download the latest version of Odin to avoid any compatibility issues with your Samsung Galaxy S7 Edge.

To download Odin, visit a reputable source such as the XDA Developers forum or the official Odin download page. It’s crucial to download from a trusted site to prevent downloading malicious software.

After downloading, extract the contents of the Odin ZIP file to a folder on your computer. This will typically include the Odin executable and some additional files required for the flashing process.

Remember, running Odin requires administrator privileges on your computer. Right-click the Odin executable and select ‘Run as administrator’ to proceed with the installation of TWRP Recovery in the following steps.

Installing TWRP Recovery

Boot into Download Mode

To flash TWRP Recovery onto your Samsung Galaxy S7 Edge, you must first boot your device into Download Mode. This special boot mode allows your device to interface with Odin, the software used for flashing firmware.

Follow these steps to enter Download Mode:

  1. Power off your device completely.
  2. Press and hold the ‘Volume Down’, ‘Home’, and ‘Power’ buttons simultaneously.
  3. When the warning screen appears, release all buttons.
  4. Press the ‘Volume Up’ button to continue into Download Mode.

Ensure your device is fully charged or has enough battery to avoid interruptions during the flashing process. An unexpected shutdown could brick your device.

Flash TWRP Recovery

With your Samsung Galaxy S7 Edge in Download Mode and the necessary files at hand, you’re ready to flash TWRP Recovery using Odin. Open the Odin tool on your computer and connect your device using a USB cable.

  • Ensure that Odin recognizes your device by checking the ‘ID:COM’ section; it should display a blue box with a COM number.
  • Click on the ‘AP’ button and select the TWRP Recovery file you downloaded earlier (usually a .tar or .md5 file).
  • Do not check ‘Re-Partition’ under the ‘Options’ tab.
  • Click ‘Start’ to begin the flashing process.

Once the flash is complete, Odin will display a ‘PASS’ message, and your device may reboot automatically. If it doesn’t, manually reboot your device but make sure to directly boot into Recovery Mode to finalize the TWRP installation.

It’s crucial to immediately boot into TWRP Recovery after flashing it. This step ensures that the stock recovery doesn’t overwrite the custom recovery upon first boot.

Reboot into Recovery Mode

Once TWRP Recovery has been successfully flashed to your Samsung Galaxy S7 Edge, it’s crucial to immediately reboot into Recovery Mode. This step is essential to ensure that the stock recovery does not overwrite the custom TWRP Recovery you’ve just installed.

To reboot into Recovery Mode, follow these steps:

  1. Hold down the Power and Volume Down buttons to turn off your device.
  2. Once the device is off, press and hold the Power, Volume Up, and Home buttons simultaneously.
  3. Release the buttons when the Samsung logo appears and the device vibrates. Your device should now boot into TWRP Recovery.

It’s important to familiarize yourself with the TWRP interface and its various options. Take a moment to explore the recovery environment, but avoid making any changes or flashing any files until you’ve completed the next section of this guide.

Final Steps

Backup Your Data

Before proceeding to verify the TWRP installation, it’s crucial to backup your data. This ensures that you have a safe copy of all your important files and system data, should you need to restore your device to its previous state.

  • Connect your device to a PC and copy all your personal files.
  • Use Samsung’s Smart Switch software to backup your apps, contacts, and settings.
  • Consider using cloud services for an additional layer of data security.

Remember, having multiple backups in different locations minimizes the risk of data loss.

After securing your data, you can confidently move on to the next step, knowing that your information is safe.

Verify TWRP Installation

Once you have rebooted your Samsung Galaxy S7 Edge into recovery mode, you should be greeted with the TWRP interface. This confirms that TWRP has been successfully installed on your device. Navigate through the TWRP menu to ensure all features are accessible and functioning properly.

If you encounter any issues or the TWRP recovery does not load, you may need to repeat the flashing process or check for an updated TWRP image for your specific device model.

It’s crucial to ensure that TWRP is operational before proceeding with any further modifications to your device, such as flashing custom ROMs or taking system backups.

Remember, having a custom recovery like TWRP allows you to perform a variety of advanced functions:

  • Full system backups (Nandroid backups)
  • Advanced wipe options
  • Installation of custom ROMs and ZIP files
  • Root access management

By confirming the installation of TWRP, you’ve taken a significant step towards customizing and enhancing the functionality of your Samsung Galaxy S7 Edge.


In conclusion, installing TWRP Recovery on your Samsung Galaxy S7 Edge is a crucial step for customizing and optimizing your device. With TWRP Recovery, you can easily flash custom ROMs, create backups, and perform advanced system modifications. By following the step-by-step guide provided in this article, you can unlock the full potential of your Samsung Galaxy S7 Edge and enhance your overall user experience. Take control of your device today and explore the endless possibilities that TWRP Recovery has to offer.

Frequently Asked Questions

What is TWRP Recovery and why do I need it on my Samsung Galaxy S7 Edge?

TWRP Recovery is a custom recovery that allows you to install custom ROMs, create backups, and perform advanced system tasks on your device. It is essential for customizing and optimizing your Samsung Galaxy S7 Edge.

Is it safe to install TWRP Recovery on my Samsung Galaxy S7 Edge?

When done correctly, installing TWRP Recovery is generally safe. However, it involves unlocking the bootloader and flashing custom files, so there is a risk of voiding your warranty or damaging your device if not done properly.

Can I revert back to the stock recovery after installing TWRP on my Samsung Galaxy S7 Edge?

Yes, you can revert back to the stock recovery by flashing the stock recovery image. This process will remove TWRP Recovery and restore the device to its original state.

Do I need to root my Samsung Galaxy S7 Edge to install TWRP Recovery?

Rooting is not a prerequisite for installing TWRP Recovery. However, some advanced features of TWRP may require root access to fully utilize.

Will installing TWRP Recovery erase all the data on my Samsung Galaxy S7 Edge?

Flashing TWRP Recovery itself does not erase data. However, it is recommended to backup your data before proceeding with any custom recovery installation to prevent data loss.

How can I check if TWRP Recovery is properly installed on my Samsung Galaxy S7 Edge?

You can verify the TWRP installation by booting into recovery mode. If TWRP Recovery interface appears, it indicates a successful installation.

Leave a comment