Install TWRP Recovery on Samsung Galaxy M31

Installing TWRP Recovery on your Samsung Galaxy M31 is a crucial step towards customizing and optimizing your device. This guide will walk you through the process of unlocking the bootloader, downloading necessary files, and installing TWRP Recovery to enhance your Android experience.

Key Takeaways

  • Unlocking the bootloader is essential for installing TWRP Recovery on your Samsung Galaxy M31.
  • Enabling Developer Options and USB Debugging are necessary for successful installation of TWRP Recovery.
  • Downloading TWRP Recovery and Odin Tool are key steps in preparing your device for installation.
  • Flashing TWRP Recovery using Odin is a critical process in installing TWRP on your Samsung Galaxy M31.
  • Verifying TWRP Installation ensures that the recovery is successfully installed on your device.

Preparing Your Device

Unlocking Bootloader

Before you can install TWRP Recovery on your Samsung Galaxy M31, it’s essential to unlock the bootloader. Unlocking the bootloader is the first step towards customizing your device, as it allows you to flash custom recoveries and ROMs.

To unlock the bootloader, you’ll need to follow these general steps:

  1. Go to the Samsung Developer website and log in or create an account.
  2. Register your device using its IMEI number.
  3. Follow the instructions provided to unlock the bootloader.

Remember, unlocking the bootloader may void your warranty and will erase all data on the device. It’s crucial to back up any important information before proceeding.

Enabling Developer Options

Before you can proceed with customizing your Samsung Galaxy M31, you’ll need to enable Developer Options. This hidden menu provides advanced users with additional features and settings to tweak their device’s performance. To enable Developer Options, follow these steps:

  • Go to the Settings app on your device.
  • Scroll down and select About phone.
  • Find and tap on the Build number section 7 times. You will see a message that says ‘Developer mode has been enabled’.

Once Developer Options are enabled, you’ll have access to a variety of tools and settings that are essential for the installation of TWRP Recovery. Make sure to proceed with caution, as these options are intended for experienced users.

Enabling USB Debugging

With the bootloader unlocked and Developer Options enabled, the next crucial step is enabling USB Debugging. This feature is essential for establishing a direct line of communication between your Samsung Galaxy M31 and your computer, which is necessary for the upcoming steps.

To enable USB Debugging, follow these simple steps:

  1. Go to ‘Settings’ on your device.
  2. Scroll down and tap on ‘Developer Options’.
  3. Locate ‘USB Debugging’ and toggle the switch to enable it.

Ensure that your device is connected to your computer via a USB cable and that it is recognized properly. This will confirm that USB Debugging is functioning as intended.

Once USB Debugging is activated, you’re all set to proceed with downloading the necessary files to install TWRP Recovery on your Samsung Galaxy M31.

Downloading Necessary Files

Downloading TWRP Recovery

To install TWRP Recovery on your Samsung Galaxy M31, you must first download the correct image file for your device. Ensure you download the version of TWRP that is specifically tailored for the Galaxy M31 to avoid compatibility issues.

Visit the official TWRP website or a trusted community forum to find the download link. Below is a list of steps to guide you through the process:

  • Navigate to the official TWRP website (
  • Use the search function to locate ‘Samsung Galaxy M31’.
  • Select the appropriate TWRP image file for your device model.
  • Click on the ‘Download’ button to start the download process.

Remember to verify the checksum of the downloaded file to ensure its integrity and authenticity. This step is crucial for maintaining the security of your device.

Downloading Odin Tool

With the Odin tool now downloaded, you’re ready to proceed with the installation of TWRP Recovery on your Samsung Galaxy M31. Ensure that Odin is extracted and ready to use before moving forward, as it will be the key software to flash TWRP onto your device.

Before starting the flashing process, it’s crucial to verify that your device’s battery is at least 50% charged to prevent any interruptions due to power loss.

Follow these steps to install TWRP Recovery:

  1. Launch the Odin tool on your computer.
  2. Power off your Samsung Galaxy M31 and enter Download Mode.
  3. Connect your device to the computer using a USB cable.
  4. Load the TWRP Recovery file into Odin.
  5. Start the flashing process and wait for it to complete.

After successfully flashing TWRP, your device will have a powerful tool for custom ROM installation, full backups, and more. Remember to follow each step carefully to avoid any potential issues.

Installing TWRP Recovery

Flashing TWRP Recovery using Odin

Once you have Odin and the TWRP recovery file ready, you’re set to flash TWRP onto your Samsung Galaxy M31. Ensure your device is in Download mode before connecting it to your computer via USB.

Follow these steps to flash TWRP using Odin:

  1. Launch Odin on your computer.
  2. Click on the ‘AP’ button and select the TWRP recovery file you downloaded.
  3. Make sure that ‘Auto Reboot’ and ‘F. Reset Time’ options are checked.
  4. Click on ‘Start’ to begin the flashing process.

The progress bar in Odin will show you the status of the flash. Do not disconnect your device until the process is complete and you see a ‘PASS’ message on Odin.

After flashing, your device may reboot automatically. If it doesn’t, manually reboot your device by holding the power button. Remember, the first boot after flashing TWRP may take longer than usual, so be patient.

Booting into TWRP Recovery

Once you have successfully flashed TWRP Recovery using Odin, the next crucial step is to boot your Samsung Galaxy M31 into TWRP Recovery mode. This is a simple yet vital process to ensure that TWRP is properly installed and functioning.

To boot into TWRP Recovery, follow these steps:

  1. Power off your device completely.
  2. Press and hold the Volume Up + Power buttons simultaneously.
  3. Release the buttons when the Samsung logo appears, and the device should boot into TWRP Recovery mode.

It’s important to note that if you don’t boot into TWRP Recovery mode immediately after flashing, the stock recovery might overwrite the custom recovery, necessitating a reflash.

Once in TWRP Recovery, you can start utilizing its features to backup, restore, and flash custom ROMs. This is a significant milestone in customizing your device, as TWRP offers a touch-based recovery environment which is more user-friendly compared to the stock recovery.

Verifying TWRP Installation

Once you have flashed TWRP Recovery onto your Samsung Galaxy M31, it’s crucial to verify that the installation was successful. Boot your device into recovery mode; you should now see the TWRP interface instead of the default recovery screen. If TWRP loads up, congratulations, you’ve installed it correctly!

To ensure that TWRP is functioning properly, you can perform the following checks:

  • Check if you can navigate through the TWRP menu without any issues.
  • Try mounting different partitions, such as System and Data, to confirm they are accessible.
  • Create a backup of your current system to test TWRP’s backup functionality.

Remember, having a working recovery is essential for troubleshooting and modifying your device. If you encounter any issues, revisit the installation steps to troubleshoot or consult online forums for assistance.

If everything checks out, you’re all set to use TWRP for managing your device’s firmware, installing custom ROMs, taking backups, and much more. Enjoy the new level of control over your Samsung Galaxy M31!


In conclusion, installing TWRP Recovery on your Samsung Galaxy M31 can greatly enhance your device’s capabilities and customization options. With TWRP Recovery, you can easily flash custom ROMs, create backups, and perform advanced system modifications. By following the steps outlined in this guide, you can unlock the full potential of your Samsung Galaxy M31 and take your Android experience to the next level.

Frequently Asked Questions

What is TWRP Recovery?

TWRP (Team Win Recovery Project) is a custom recovery for Android devices that allows users to install custom ROMs, create backups, and perform various system tasks.

Is it safe to install TWRP Recovery on Samsung Galaxy M31?

When done correctly, installing TWRP Recovery on Samsung Galaxy M31 is safe. However, it may void your warranty and there are risks involved if not followed properly.

Do I need to root my Samsung Galaxy M31 to install TWRP Recovery?

No, you do not need to root your Samsung Galaxy M31 to install TWRP Recovery. However, unlocking the bootloader is usually required.

Can I revert back to the stock recovery after installing TWRP on Samsung Galaxy M31?

Yes, you can revert back to the stock recovery on Samsung Galaxy M31 by flashing the stock recovery image using Odin.

Will installing TWRP Recovery erase all data on my Samsung Galaxy M31?

Installing TWRP Recovery itself does not erase data on Samsung Galaxy M31. However, performing certain actions within TWRP Recovery can lead to data loss, so it’s important to back up your data.

Where can I find support if I encounter issues during the TWRP Recovery installation process?

You can seek help from online forums, XDA Developers community, or reach out to the TWRP Recovery team for assistance if you encounter any issues during the installation process.

Leave a comment