Rooting your Samsung Galaxy Tab S7 FE with Magisk can give you more control over your device and access to advanced customization options. This step-by-step guide will walk you through the process of rooting your device safely and effectively.
Key Takeaways
- Rooting your Samsung Galaxy Tab S7 FE with Magisk can enhance your device’s performance and functionality.
- Make sure to check your device model and follow the necessary steps to prepare your device for rooting.
- Installing Magisk Manager, Samsung USB Drivers, and setting up ADB and Fastboot are essential for the rooting process.
- Flashing a custom recovery, installing Magisk, and verifying root access are key steps in the rooting process.
- Rooting your device can void the warranty, so proceed with caution and follow the instructions carefully.
Preparing Your Device
Checking Device Model
Before proceeding with the rooting process, it’s crucial to verify that you have the correct model of the Samsung Galaxy Tab S7 FE. Rooting the wrong model can lead to irreparable damage to your device.
To check your device model, go to:
- Settings
- About tablet
- Model number
Make sure the model number matches one of the supported models for rooting with Magisk:
- SM-T730 (Wi-Fi)
- SM-T735 (LTE)
- SM-T736B (5G)
It’s essential to double-check your device model as the rooting process is model-specific and using files intended for a different model can cause your device to malfunction.
Enabling Developer Options
Before you can proceed with rooting your Samsung Galaxy Tab S7 FE, you must enable Developer Options. This hidden menu provides advanced users with additional features and settings that are not available to the standard user. To enable Developer Options, go to your device’s Settings, scroll down to ‘About tablet’, and tap on ‘Build number’ seven times. You will see a message indicating that Developer Options have been unlocked.
Once Developer Options are enabled, you will have access to a variety of new settings. It’s important to proceed with caution, as some of these settings can significantly affect your device’s performance and security.
Ensure that you only adjust settings within Developer Options that are required for the rooting process, such as ‘OEM Unlocking’ and ‘USB Debugging’.
Remember, enabling Developer Options is a prerequisite for unlocking the bootloader, which is the next critical step in the rooting process.
Unlocking Bootloader
Before proceeding with the bootloader unlock, ensure that you have backed up all important data, as this process will erase all data on your device. Unlocking the bootloader is an essential step for rooting because it allows you to install custom firmware on your Samsung Galaxy Tab S7 FE.
To unlock the bootloader, follow these steps:
- Turn off your tablet.
- Press and hold the Volume Up and Power buttons simultaneously to enter Download Mode.
- When the bootloader screen appears, use the Volume keys to toggle the selection to ‘Unlock Bootloader’ and confirm with the Power button.
- Your device will perform a factory reset and reboot with an unlocked bootloader.
Note: Unlocking the bootloader may void your warranty and can also make your device more vulnerable to security risks. Proceed with caution and understand the implications.
Installing Required Software
Downloading Magisk Manager
Before proceeding with the rooting process, you need to download Magisk Manager. This application is essential for managing root access and installing modules to customize and enhance your device’s performance. Ensure you download the latest version of Magisk Manager from the official GitHub repository to avoid compatibility issues.
To download Magisk Manager, follow these steps:
- Visit the official Magisk GitHub page.
- Look for the ‘Magisk Manager’ APK file under the ‘Assets’ section of the latest release.
- Download the APK file to your computer.
Remember to check the SHA256 checksum of the downloaded file to ensure its integrity and security. This step is crucial to protect your device from any malicious software.
Installing Samsung USB Drivers
Before you can start using ADB and Fastboot with your Samsung Galaxy Tab S7 FE, you need to ensure that your computer can communicate with your device. Installing the Samsung USB drivers is a crucial step in this process.
- First, visit the official Samsung Download Center.
- Navigate to the ‘Mobile’ section and select ‘Tablets’.
- Choose ‘Galaxy Tabs’ and then your specific model.
- Look for the ‘Support’ tab and find the downloads for USB drivers.
Once you have downloaded the drivers, run the installer and follow the on-screen instructions to complete the installation. After installation, connect your tablet to your computer to verify that the drivers are working correctly.
It’s important to restart your computer after installing the drivers to ensure that all changes take effect properly.
Setting up ADB and Fastboot
With Magisk Manager downloaded and Samsung USB drivers installed, the next step is to set up ADB (Android Debug Bridge) and Fastboot on your computer. These are vital tools for the rooting process as they allow you to communicate with and send commands to your Galaxy Tab S7 FE.
Follow these steps to set up ADB and Fastboot:
- Download the ADB and Fastboot toolkit from a reliable source.
- Extract the ZIP file to a folder on your computer.
- Open the folder where you extracted the files and launch a command window from within the folder.
- Test the installation by typing
adb devicesin the command window. If the setup is correct, you should see a list of devices attached to your computer.
Remember, having ADB and Fastboot properly configured is crucial for a successful rooting process. Ensure that your device is recognized by the computer before proceeding to the next steps.
Rooting Process
Flashing Custom Recovery
Before proceeding with flashing a custom recovery, ensure that your Samsung Galaxy Tab S7 FE is fully charged and that you have backed up all important data. Flashing a custom recovery is a critical step that will allow you to install Magisk and root your device.
To flash a custom recovery, follow these steps:
- Download the latest version of a custom recovery, such as TWRP, for your specific device model.
- Connect your tablet to your computer via USB.
- Open a command prompt or terminal window in the directory where ADB and Fastboot are installed.
- Reboot your device into bootloader mode by typing
adb reboot bootloader. - Once in bootloader mode, flash the custom recovery image by typing
fastboot flash recovery <recovery-image-file.img>. - After the flashing process is complete, reboot your device by typing
fastboot reboot.
Remember, flashing a custom recovery will replace the stock recovery, and you should proceed with caution. This step is reversible, but it’s important to follow instructions carefully to avoid bricking your device.
Installing Magisk
With your Samsung Galaxy Tab S7 FE in custom recovery mode, it’s time to install Magisk and root your device. Ensure that you have the latest version of Magisk ZIP file saved on your device’s storage or SD card.
Follow these steps to install Magisk:
- In the custom recovery, select ‘Install’ from the menu.
- Navigate to the location where you saved the Magisk ZIP file.
- Select the Magisk ZIP file and confirm the flash by swiping the slider.
- Wait for the installation process to complete. It may take a few minutes.
- Once done, reboot your device by selecting ‘Reboot System’ in the recovery menu.
After rebooting, the Magisk Manager app should appear in your app drawer, indicating that Magisk is installed. If it’s not there, install the Magisk Manager APK manually.
Remember, rooting your device can void the warranty and may affect the functionality of certain apps. Always back up your data before proceeding with the rooting process.
Verifying Root Access
Once you have installed Magisk on your Samsung Galaxy Tab S7 FE, the final step is to verify that your device is properly rooted. This ensures that you have full administrative access and that the root was successful.
To check root access, you can download and install a root checker app from the Google Play Store. Follow these simple steps:
- Open the Google Play Store.
- Search for ‘Root Checker’.
- Install the app on your device.
- Open the app and follow the instructions to verify root access.
If the root checker app confirms that your device is rooted, congratulations! You now have the freedom to customize and enhance your device’s performance with root-only apps and mods. If the app indicates that your device is not rooted, you may need to revisit the previous steps or seek additional help from online forums or communities.
Remember, rooting your device can void your warranty and may expose your device to security risks. Always make sure to follow rooting guides carefully and understand the implications of rooting your device.
Conclusion
In conclusion, rooting your Samsung Galaxy Tab S7 FE with Magisk can provide you with greater control over your device and access to advanced customization options. However, it is important to proceed with caution and follow the steps carefully to avoid any potential risks. By following this step-by-step guide, you can successfully root your device and unlock its full potential. Happy rooting!
Frequently Asked Questions
What is rooting and why would I root my Samsung Galaxy Tab S7 FE?
Rooting is the process of gaining full administrative control over the device. People root their devices to customize the software, remove bloatware, and access features that are restricted by the manufacturer.
Is rooting legal?
Rooting itself is not illegal, but it can void your device warranty and may cause security risks. It’s important to understand the implications before proceeding.
Will rooting my Samsung Galaxy Tab S7 FE void the warranty?
Yes, rooting your device usually voids the warranty. However, you can often unroot your device and restore the warranty if needed.
Can rooting my device cause it to become bricked?
Rooting done improperly can potentially brick your device, making it unusable. It’s crucial to follow instructions carefully and understand the risks involved.
Do I need to unlock the bootloader before rooting my Samsung Galaxy Tab S7 FE?
Yes, unlocking the bootloader is usually a necessary step before rooting your device. It allows you to install custom software like custom recoveries and Magisk.
Can I unroot my Samsung Galaxy Tab S7 FE after rooting it with Magisk?
Yes, you can unroot your device by using the unroot option in Magisk Manager. This will remove root access and restore the device to its original state.